Jump to content

Brick Daemon 2.4.6 not working


Recommended Posts

Hello,

I have upgraded four of our systems from brickd 2.4.5 -> 2.4.6, and brickd stopped responding on all of them:

<I> <main_linux.c:385> Brick Daemon 2.4.6 started (architecture: arm, pid: 25228, daemonized: 1)
<I> <main_linux.c:391> Running on Linux system (sysname: Linux, release: 6.1.21-v7+, version: #1642 SMP Mon Apr  3 17:20:52 BST 2023, machine: armv7l)
<I> <bricklet.c:274> Found supported HAT product_id 0x084e in device tree, using default HAT Brick config
<I> <bricklet.c:315> Found Bricklet port A (spidev: /dev/spidev0.0, driver: gpio, name: GPIO23, num: 23)
<I> <bricklet_stack_linux.c:87> Using spidev backend for Bricklets, because Raspberry Pi without BCM2835 detected
<I> <bricklet.c:315> Found Bricklet port B (spidev: /dev/spidev0.0, driver: gpio, name: GPIO22, num: 22)
<I> <bricklet.c:315> Found Bricklet port C (spidev: /dev/spidev0.0, driver: gpio, name: GPIO25, num: 25)
<I> <bricklet.c:315> Found Bricklet port D (spidev: /dev/spidev0.0, driver: gpio, name: GPIO26, num: 26)
<I> <bricklet.c:315> Found Bricklet port E (spidev: /dev/spidev0.0, driver: gpio, name: GPIO27, num: 27)
<I> <bricklet.c:315> Found Bricklet port F (spidev: /dev/spidev0.0, driver: gpio, name: GPIO24, num: 24)
<I> <bricklet.c:315> Found Bricklet port G (spidev: /dev/spidev0.0, driver: gpio, name: GPIO7, num: 7)
<E> <bricklet_stack_linux_spidev.c:263> Could not find line GPIO7
<I> <main_linux.c:579> Brick Daemon 2.4.6 stopped

These systems are all Raspberry Pi 3 Model A Plus Rev 1.0 with a HAT Brick.

Downgrading to brickd 2.4.5 fixed the problem on all four systems, for now.

Is this a known issue?

Link zu diesem Kommentar
Share on other sites

Hello all

Thank you for the information. I have the same problem and like to downgrade to 2.4.5, but get an error when trying to do that:

sudo apt install brickd=2.4.5
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
E: Version '2.4.5' for 'brickd' was not found

How can i fix that?

 

Ok, found it. How I did it (perhaps would help others):

wget https://download.tinkerforge.com/tools/brickd/linux/brickd-2.4.5_armhf.deb
sudo dpkg --install brickd-2.4.5_armhf.deb
rm brickd-2.4.5_armhf.deb

 

bearbeitet von zbindenp
Found a workaround
Link zu diesem Kommentar
Share on other sites

  • 1 month later...
On 9/17/2024 at 4:13 PM, nineax said:

I get the message “Brick Daemon 2.4.7 stopped”

Where do you get this message?

Could you please show the full output of the command "systemctl status brickd", the command "uname -a", the command "gpioinfo" and attach the /var/log/brickd.log file from your Raspberry Pi?

Link zu diesem Kommentar
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Gast
Reply to this topic...

×   Du hast formatierten Text eingefügt.   Formatierung jetzt entfernen

  Only 75 emoji are allowed.

×   Dein Link wurde automatisch eingebettet.   Einbetten rückgängig machen und als Link darstellen

×   Dein vorheriger Inhalt wurde wiederhergestellt.   Clear editor

×   Du kannst Bilder nicht direkt einfügen. Lade Bilder hoch oder lade sie von einer URL.

×
×
  • Neu erstellen...