Sinus76

Hallo zusammen, ich habe eine 2,5 Jahre alte WARP 1 Smart, die plötzlich und ohne jegliche Änderung an Zuleitung oder EV nicht mehr will. Es wird der Fehlercode 4 angezeigt, was auf Schütz, Feinsicherung oder Erde hinweist. - Aus, 10sek und Ein bringt nichts. - Erdung ist kontrolliert und OK. - Beide Feinsicherungen entfernt und durchgemessen. - Schütz schaltet korrekt, wenn man ihn getrennt/manuell ansteuert. Klebt auch nicht. - Reset/Zurücksetzen/Update bringt nichts. - Mini Countryman seit jeher und dieser lädt auch korrekt an anderen Stationen. Hat jemand noch eine Idee? Gruß Patrick 2024-09-05T07-32-38-911Z Scroll down for event log! {"uptime": 195072, "free_heap_bytes":138396, "largest_free_heap_block":65524, "devices": [ {"UID":"VgL", "DID":2159, "port":"A"}], "error_counters": [ {"port": "A", "SpiTfpChecksum": 0, "SpiTfpFrame": 0, "TfpFrame": 0, "TfpUnexpected": 0},{"port": "B", "SpiTfpChecksum": 0, "SpiTfpFrame": 0, "TfpFrame": 0, "TfpUnexpected": 0},{"port": "C", "SpiTfpChecksum": 0, "SpiTfpFrame": 0, "TfpFrame": 0, "TfpUnexpected": 0},{"port": "D", "SpiTfpChecksum": 0, "SpiTfpFrame": 0, "TfpFrame": 0, "TfpUnexpected": 0},{"port": "E", "SpiTfpChecksum": 0, "SpiTfpFrame": 0, "TfpFrame": 0, "TfpUnexpected": 0},{"port": "F", "SpiTfpChecksum": 0, "SpiTfpFrame": 0, "TfpFrame": 0, "TfpUnexpected": 0}], "version": {"firmware":"1.3.0-617bc859","spiffs":"1.3.0-617bc859"}, "modules": {"event_log":true,"esp32_brick":false,"wifi":true,"mqtt":true,"http":false,"ws":false,"firmware_update":true,"evse":true,"sdm72dm":false,"authentication":true,"charge_manager":true,"cm_networking":true,"nfc":false}, "wifi/state": {"connection_state":-1,"ap_state":1,"ap_bssid":"10:52:1C:89:52:45","sta_ip":[0,0,0,0],"sta_rssi":0,"sta_bssid":""}, "wifi/sta_config": {"enable_sta":false,"ssid":"","bssid":[0,0,0,0,0,0],"bssid_lock":false,"passphrase":null,"hostname":"warp-U99","ip":[0,0,0,0],"gateway":[0,0,0,0],"subnet":[0,0,0,0],"dns":[0,0,0,0],"dns2":[0,0,0,0]}, "wifi/ap_config": {"enable_ap":true,"ap_fallback_only":false,"ssid":"warp-U99","hide_ssid":false,"passphrase":null,"hostname":"warp-U99","channel":1,"ip":[10,0,0,1],"gateway":[10,0,0,1],"subnet":[255,255,255,0]}, "mqtt/config": {"enable_mqtt":false,"broker_host":"","broker_port":1883,"broker_username":"","broker_password":null,"global_topic_prefix":"warp/U99","client_name":"warp-U99"}, "mqtt/state": {"connection_state":0,"last_error":0}, "evse/state": {"iec61851_state":4,"vehicle_state":3,"contactor_state":0,"contactor_error":4,"charge_release":2,"allowed_charging_current":16000,"error_state":4,"lock_state":0,"time_since_state_change":184675,"uptime":196775}, "evse/hardware_configuration": {"jumper_configuration":3,"has_lock_switch":false}, "evse/low_level_state": {"low_level_mode_enabled":false,"led_state":2,"cp_pwm_duty_cycle":1000,"adc_values":[31879,16097],"voltages":[12249,2012,12249],"resistances":[65535,673],"gpio":[false,false,true,false,true],"hardware_version":15,"charging_time":0}, "evse/max_charging_current": {"max_current_configured":32000,"max_current_incoming_cable":16000,"max_current_outgoing_cable":20000,"max_current_managed":0}, "evse/auto_start_charging": {"auto_start_charging":true}, "evse/managed": {"managed":false}, "evse/user_calibration": {"user_calibration_active":false,"voltage_diff":-114,"voltage_mul":12193,"voltage_div":12169,"resistance_2700":308,"resistance_880":[348,230,378,389,472,169,464,484,539,517,543,368,507,395]}, "evse/button_state": {"button_press_time":0,"button_release_time":0,"button_pressed":false}, "authentication/config": {"enable_auth":false,"username":"","password":null}, "charge_manager/config": {"enable_charge_manager":false,"enable_watchdog":false,"default_available_current":0,"maximum_available_current":0,"minimum_current":6000,"verbose":false,"chargers":[{"host":"127.0.0.1","name":"warp-U99"}]}, "charge_manager/state": {"state":0,"uptime":0,"chargers":[]}, "charge_manager/available_current": {"current":0}, "reboot": null, "wifi/scan": null, "wifi/sta_config_update": {"enable_sta":false,"ssid":"","bssid":[0,0,0,0,0,0],"bssid_lock":false,"passphrase":null,"hostname":"warp-U99","ip":[0,0,0,0],"gateway":[0,0,0,0],"subnet":[0,0,0,0],"dns":[0,0,0,0],"dns2":[0,0,0,0]}, "wifi/ap_config_update": {"enable_ap":true,"ap_fallback_only":false,"ssid":"warp-U99","hide_ssid":false,"passphrase":null,"hostname":"warp-U99","channel":1,"ip":[10,0,0,1],"gateway":[10,0,0,1],"subnet":[255,255,255,0]}, "mqtt/config_update": {"enable_mqtt":false,"broker_host":"","broker_port":1883,"broker_username":"","broker_password":null,"global_topic_prefix":"warp/U99","client_name":"warp-U99"}, "evse/auto_start_charging_update": {"auto_start_charging":true}, "evse/current_limit": {"current":32000}, "evse/stop_charging": null, "evse/start_charging": null, "evse/managed_current_update": {"current":0}, "evse/managed_update": {"managed":false,"password":null}, "evse/user_calibration_update": {"user_calibration_active":false,"voltage_diff":-114,"voltage_mul":12193,"voltage_div":12169,"resistance_2700":308,"resistance_880":[348,230,378,389,472,169,464,484,539,517,543,368,507,395]}, "evse/reflash": null, "evse/reset": null, "authentication/config_update": {"enable_auth":false,"username":"","password":null}, "charge_manager/config_update": {"enable_charge_manager":false,"enable_watchdog":false,"default_available_current":0,"maximum_available_current":0,"minimum_current":6000,"verbose":false,"chargers":[{"host":"127.0.0.1","name":"warp-U99"}]}, "charge_manager/available_current_update": {"current":0}} 15 **** TINKERFORGE WARP Charger V1.3.0-617bc859 **** 16 278K RAM SYSTEM 233504 HEAP BYTES FREE 16 READY. 574 WARP Charger SPIFFS version 1.3.0-617bc859 2407 Had to configure softAP ip 1 times. 4408 Soft AP started. 4408 SSID: warp-U99 4409 hostname: warp-U99 4801 IP: 10.0.0.1 4808 mDNS responder started 5524 No RS485 bricklet found. Disabling energy meter support. 6946 No NFC bricklet found. Disabling NFC support. 7017 EVSE: Contactor error 4 11677 EVSE: Error state 4 30107 Got no managed current update for more than 30 seconds. Setting managed current to 0

Da hast Du natürlich recht, das war 1.2.3. auf 1.2.4.

Hallo, kann es sein, dass nach einem Update in der GUI Usernamen und Passwort gefordert werden? Unter der 3.15 war definitiv ein offener Zugang ohne Passwort eingestellt, jetzt bei 3.16 kommt nun die Abfrage. Ich meine allerdings, bei dem Updatevorgang kurz einen roten Balken gesehen zu haben, anstatt einem grünen, wie bei den anderen Warp1 Installationen. Ein Rücksetzen per Stromlos & Taste bringt keine Besserung. Bin etwas ratlos... Danke und Gruß Patrick