tf@red-brick:~$ dmesg [ 0.000000] Booting Linux on physical CPU 0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Linux version 3.4.103+ (matthias@blackbox) (gcc version 4.8.2 20131014 (prerelease) (crosstool-NG linaro-1.13.1-4.8-2013.10 - Linaro GCC 2013.10) ) #1 PREEMPT Wed Mar 11 13:14:20 CET 2015 [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine: sun5i [ 0.000000] Memory Reserved: [ 0.000000] SYS : 0x43000000 - 0x4300ffff ( 64 kB) [ 0.000000] LCD : 0x44000000 - 0x44ffffff ( 16 MB) [ 0.000000] Memory policy: ECC disabled, Data cache writeback [ 0.000000] sunxi: Allwinner A10s revision B (AW1625/sun5i) detected. [ 0.000000] On node 0 totalpages: 131072 [ 0.000000] free_area_init_node: node 0, pgdat 807e27e8, node_mem_map 90000000 [ 0.000000] DMA zone: 512 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 65024 pages, LIFO batch:15 [ 0.000000] Normal zone: 512 pages used for memmap [ 0.000000] Normal zone: 65024 pages, LIFO batch:15 [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048 [ 0.000000] Kernel command line: mem=512M@0x40000000 sunxi_ve_mem_reserve=0 sunxi_g2d_mem_reserve=0 sunxi_fb_mem_reserve=16 root=/dev/mmcblk0p1 init=/sbin/init quiet splash loglevel=0 panic=0 disp.screen0_output_mode=EDID:800x480p60 hdmi.audio=EDID:0 consoleblank=0 [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Memory: 512MB = 512MB total [ 0.000000] Memory: 494544k/494544k available, 29744k reserved, 0K highmem [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xa0800000 - 0xff000000 (1512 MB) [ 0.000000] lowmem : 0x80000000 - 0xa0000000 ( 512 MB) [ 0.000000] modules : 0x7f000000 - 0x80000000 ( 16 MB) [ 0.000000] .text : 0x80008000 - 0x8075bc4c (7504 kB) [ 0.000000] .init : 0x8075c000 - 0x80783000 ( 156 kB) [ 0.000000] .data : 0x80784000 - 0x807e32c0 ( 381 kB) [ 0.000000] .bss : 0x807e32e4 - 0x8088c3c8 ( 677 kB) [ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS:128 [ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms [ 0.000000] Console: colour dummy device 80x30 [ 0.000000] console [tty0] enabled [ 0.000127] Calibrating delay loop... 1001.88 BogoMIPS (lpj=5009408) [ 0.039994] pid_max: default: 32768 minimum: 301 [ 0.040111] Mount-cache hash table entries: 512 [ 0.040568] Initializing cgroup subsys cpuacct [ 0.040585] Initializing cgroup subsys devices [ 0.040595] Initializing cgroup subsys freezer [ 0.040603] Initializing cgroup subsys blkio [ 0.040674] CPU: Testing write buffer coherency: ok [ 0.040861] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available [ 0.040948] Setting up static identity map for 0x40523fd8 - 0x4052400c [ 0.041562] devtmpfs: initialized [ 0.042829] dummy: [ 0.042953] NET: Registered protocol family 16 [ 0.043530] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.043984] hw-breakpoint: debug architecture 0x4 unsupported. [ 0.044772] Init eGon pin module V2.0 [ 0.044800] SOFTWINNER DMA Driver, (c) 2003-2004,2006 Simtec Electronics [ 0.044872] Initialize DMAC OK [ 0.049281] bio: create slab at 0 [ 0.049612] sunxi_gpio driver init ver 1.3 [ 0.049838] gpiochip_add: registered GPIOs 1 to 22 on device: A1X_GPIO [ 0.050215] SCSI subsystem initialized [ 0.050372] usbcore: registered new interface driver usbfs [ 0.050432] usbcore: registered new interface driver hub [ 0.050557] usbcore: registered new device driver usb [ 0.050769] Advanced Linux Sound Architecture Driver Version 1.0.25. [ 0.051368] cfg80211: Calling CRDA to update world regulatory domain [ 0.051983] Switching to clocksource aw_64bits_counter [ 0.052141] FS-Cache: Loaded [ 0.052277] CacheFiles: Loaded [ 0.056407] [usb_manager]: CONFIG_USB_SW_SUNXI_USB0_OTG [ 0.056621] [sw_hcd0]: usb host driver initialize........ [ 0.056680] [sw_hcd0]: open_usb_clock [ 0.076751] [sw_hcd0]: host_init_state = 0 [ 0.076760] [sw_hcd0]: platform is usb host [ 0.076790] [sw_hcd0]: sw_hcd_host0: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx (X), HB-ISO Tx (X), SoftConn) [ 0.076840] [sw_hcd0]: sw_hcd_init_controller: sw_hcd_host0: USB Host mode controller at f1c13000 using PIO, IRQ 38 [ 0.076862] sw_hcd_host0 sw_hcd_host0: sw_hcd host driver [ 0.076878] sw_hcd_host0 sw_hcd_host0: new USB bus registered, assigned bus number 1 [ 0.077313] hub 1-0:1.0: USB hub found [ 0.077336] hub 1-0:1.0: 1 port detected [ 0.077356] wrn: hcd is not enable, need not start hcd [ 0.077523] [sw_hcd0]: sw_usb_host0_disable start [ 0.077535] -------sw_hcd0_soft_disconnect--------- [ 0.077545] is_on = 0, hcd0_set_vbus_cnt = 0 [ 0.077553] [sw_hcd_host0]: Set USB Power Off [ 0.077562] wrn: hcd is not enable, need not stop hcd [ 0.077592] [sw_hcd0]: close_usb_clock [ 0.077627] [sw_hcd0]: sw_usb_host0_disable end [ 0.077657] [sw_udc]: udc_init: version 20080411 [ 0.077932] NET: Registered protocol family 2 [ 0.083998] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.084341] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 0.084556] TCP bind hash table entries: 16384 (order: 4, 65536 bytes) [ 0.084682] TCP: Hash tables configured (established 16384 bind 16384) [ 0.084691] TCP: reno registered [ 0.084702] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 0.084720] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 0.084914] NET: Registered protocol family 1 [ 0.085191] RPC: Registered named UNIX socket transport module. [ 0.085202] RPC: Registered udp transport module. [ 0.085210] RPC: Registered tcp transport module. [ 0.085217] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.085879] audit: initializing netlink socket (disabled) [ 0.085921] type=2000 audit(0.079:1): initialized [ 0.092541] VFS: Disk quotas dquot_6.5.2 [ 0.092691] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.094380] NFS: Registering the id_resolver key type [ 0.095320] NTFS driver 2.1.30 [Flags: R/W]. [ 0.095670] fuse init (API version 7.18) [ 0.096137] msgmni has been set to 965 [ 0.099725] alg: No test for stdrng (krng) [ 0.099973] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.099989] io scheduler noop registered [ 0.099997] io scheduler deadline registered [ 0.100026] io scheduler cfq registered (default) [ 0.100333] sunxi disp driver loaded (/dev/disp api 1.0) [ 0.100475] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.100880] [uart]: used uart info.: 0x08 [ 0.100970] [uart]: serial probe 3 irq 4 mapbase 0x01c28c00 [ 0.121263] sunxi-uart.3: ttyS0 at MMIO 0x1c28c00 (irq = 4) is a U6_16550A [ 0.121939] brd: module loaded [ 0.123753] loop: module loaded [ 0.123771] nand driver is disabled [ 0.123778] sunxi debug register driver init [ 0.124021] [spi]: sw spi init !! [ 0.124042] [spi]: Found 2 spi devices in config files [ 0.124053] [spi]: boards num modalias max_spd_hz bus_num cs mode [ 0.124070] [spi]: spi_board0 irq gpio not used [ 0.124080] [spi]: 0 spidev 8000000 0 0 0x2 [ 0.124096] [spi]: spi_board1 irq gpio not used [ 0.124105] [spi]: 1 w5x00 8000000 1 0 0x0 [ 0.124245] [spi]: bus num = 0, spi used = 0 [ 0.124449] [spi]: source = sdram_pll_p, src_clk = 432000000, mclk 108000000 [ 0.124540] sun5i-spi sun5i-spi.0: master is unqueued, this is deprecated [ 0.124706] [spi]: allwinners SoC SPI Driver loaded for Bus SPI-0 with 1 Slaves attached [ 0.124722] [spi]: [spi-0]: driver probe succeed, base f1c05000, irq 10, dma_tx_id 33, dma_rx_id 34! [ 0.124750] [spi]: bus num = 1, spi used = 3 [ 0.124881] [spi]: source = sdram_pll_p, src_clk = 432000000, mclk 108000000 [ 0.124952] sun5i-spi sun5i-spi.1: master is unqueued, this is deprecated [ 0.125000] [spi]: allwinners SoC SPI Driver loaded for Bus SPI-1 with 2 Slaves attached [ 0.125013] [spi]: [spi-1]: driver probe succeed, base f1c06000, irq 11, dma_tx_id 35, dma_rx_id 36! [ 0.125086] emac driver is disabled [ 0.125100] [mmc_pm]: no sdio card used in configuration [ 0.125107] [mmc_pm]: No sdio card, please check your config !! [ 0.125116] [rtl8723as] rtw_drv_entry: mod_sel = 0 is incorrect. [ 0.125153] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.125202] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.125335] [sw-ehci1]: open clock [ 0.145404] [sw-ehci1]: Set USB Power ON [ 0.145419] sw-ehci sw-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.145450] sw-ehci sw-ehci.1: new USB bus registered, assigned bus number 2 [ 0.145553] sw-ehci sw-ehci.1: irq 39, io mem 0x01c14000 [ 0.162030] sw-ehci sw-ehci.1: USB 2.0 started, EHCI 1.00 [ 0.162483] hub 2-0:1.0: USB hub found [ 0.162507] hub 2-0:1.0: 1 port detected [ 0.162774] [sw-ohci1]: open clock [ 0.182816] sw-ohci sw-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver [ 0.182844] sw-ohci sw-ohci.1: new USB bus registered, assigned bus number 3 [ 0.182874] sw-ohci sw-ohci.1: irq 40, io mem 0x01c14400 [ 0.198862] ehci_irq: port change detect [ 0.246320] hub 3-0:1.0: USB hub found [ 0.246340] hub 3-0:1.0: 1 port detected [ 0.246506] Initializing USB Mass Storage driver... [ 0.246637] usbcore: registered new interface driver usb-storage [ 0.246646] USB Mass Storage support registered. [ 0.246685] usbcore: registered new interface driver ums-alauda [ 0.246717] usbcore: registered new interface driver ums-cypress [ 0.246751] usbcore: registered new interface driver ums-datafab [ 0.246783] usbcore: registered new interface driver ums_eneub6250 [ 0.246821] usbcore: registered new interface driver ums-freecom [ 0.246854] usbcore: registered new interface driver ums-isd200 [ 0.246886] usbcore: registered new interface driver ums-jumpshot [ 0.246918] usbcore: registered new interface driver ums-karma [ 0.246950] usbcore: registered new interface driver ums-onetouch [ 0.246993] usbcore: registered new interface driver ums-realtek [ 0.247027] usbcore: registered new interface driver ums-sddr09 [ 0.247061] usbcore: registered new interface driver ums-sddr55 [ 0.247093] usbcore: registered new interface driver ums-usbat [ 0.247214] mousedev: PS/2 mouse device common for all mice [ 0.247289] rtp_used == 0. [ 0.247298] ========RTC Inital =================== [ 0.247312] rtc_fetch_sysconfig_para: rtc_unused. [ 0.247318] rtc_fetch_sysconfig_para:ok [ 0.247327] pcf8563_init: after fetch_sysconfig_para: normal_i2c: 0x0. normal_i2c[1]: 0x0 [ 0.247362] i2c /dev entries driver [ 0.247589] config i2c gpio with gpio_config api [ 0.247805] i2c i2c-0: Invalid probe address 0x00 [ 0.247814] I2C: i2c-0: AW16XX I2C adapter [ 0.247850] config i2c gpio with gpio_config api [ 0.248007] i2c i2c-1: Invalid probe address 0x00 [ 0.248017] I2C: i2c-1: AW16XX I2C adapter [ 0.248048] config i2c gpio with gpio_config api [ 0.248181] i2c i2c-2: Invalid probe address 0x00 [ 0.248190] I2C: i2c-2: AW16XX I2C adapter [ 0.248275] lirc_dev: IR Remote Control driver registered, major 251 [ 0.248286] IR NEC protocol handler initialized [ 0.248293] IR RC5(x) protocol handler initialized [ 0.248300] IR RC6 protocol handler initialized [ 0.248307] IR JVC protocol handler initialized [ 0.248314] IR Sony protocol handler initialized [ 0.248321] IR RC5 (streamzap) protocol handler initialized [ 0.248328] IR SANYO protocol handler initialized [ 0.248335] IR MCE Keyboard/mouse protocol handler initialized [ 0.248343] IR LIRC bridge handler initialized [ 0.248349] [pa_drv] start!!! [ 0.248514] [pa_drv] init end!!! [ 0.251033] input: axp152 as /devices/platform/sunxi-i2c.0/i2c-0/0-0030/input/input0 [ 0.251208] axp152_dcdc1: 3300 mV [ 0.251310] axp152_dcdc2: 1000 <--> 1600 mV at 1250 mV [ 0.251388] axp152_dcdc3: 1200 mV [ 0.251464] axp152_dcdc4: 1250 mV [ 0.251554] axp152_dldo2: 3000 mV [ 0.251640] [mmc-msg] sw_mci_init [ 0.251699] [mmc-msg] MMC host used card: 0x1, boot card: 0x1, io_card 0 [ 0.251883] [mmc-msg] sdc0 set round clock 400000, src 24000000 [ 0.252118] [mmc-msg] sdc0 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B [ 0.253265] [mmc-msg] sdc0 Probe: base:0xf1c0f000 irq:32 sg_cpu:a08f1000(4fc00000) ret 0. [ 0.253305] sunxi_leds driver init [ 0.253486] Registered led device: pc05:green:status [ 0.253530] Registered led device: pc06:red:error [ 0.253565] ledtrig-cpu: registered to indicate activity on CPUs [ 0.254043] usbcore: registered new interface driver usbhid [ 0.254053] usbhid: USB HID core driver [ 0.254801] IPv4 over IPv4 tunneling driver [ 0.255260] TCP: cubic registered [ 0.255271] Initializing XFRM netlink socket [ 0.255308] NET: Registered protocol family 17 [ 0.255348] NET: Registered protocol family 15 [ 0.255455] 8021q: 802.1Q VLAN Support v1.8 [ 0.255478] Registering the dns_resolver key type [ 0.255685] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 [ 0.255718] Registering SWP/SWPB emulation handler [ 0.255879] [mmc-msg] sdc0 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timing LEGACY(SDR12) dt B [ 0.255892] [mmc-msg] sdc0 power on [ 0.255926] [ccmu] set sdc0 reset status to 0 failed! [ 0.255937] [mmc-err] Failed to release sdc0 reset [ 0.257167] registered taskstats version 1 [ 0.258513] I2C: i2c-3: HDMI I2C adapter [ 0.272040] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B [ 0.272081] [mmc-msg] sdc0 set round clock 400000, src 24000000 [ 0.282030] ParseEDID [ 0.298298] EDID version: 1.3 [ 0.298313] PCLK=32000000 X 800 840 888 928 Y 480 493 496 525 fr 65 NN [ 0.298328] Using above mode as preferred EDID mode [ 0.298508] waited 0 ms for EDID info [ 0.298558] disp clks: lcd 32000000 pre_scale 1 hdmi 32000000 pll 288000000 2x 0 [ 0.344395] [mmc-err] smc 0 err, cmd 52, RTO [ 0.345224] [mmc-err] smc 0 err, cmd 52, RTO [ 0.345243] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B [ 0.347617] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B [ 0.352834] [mmc-err] smc 0 err, cmd 5, RTO [ 0.353658] [mmc-err] smc 0 err, cmd 5, RTO [ 0.354480] [mmc-err] smc 0 err, cmd 5, RTO [ 0.355303] [mmc-err] smc 0 err, cmd 5, RTO [ 0.355938] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B [ 0.355954] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B [ 0.358326] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B [ 0.436507] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B [ 0.436523] [mmc-msg] sdc0 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B [ 0.436575] [mmc-msg] sdc0 set round clock 42857142, src 300000000 [ 0.482034] usb 2-1: new high-speed USB device number 2 using sw-ehci [ 0.491640] [mmc-msg] sdc0 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B [ 0.491662] mmc0: new high speed SDHC card at address aaaa [ 0.502053] mmcblk0: mmc0:aaaa SL08G 7.40 GiB [ 0.503408] mmcblk0: p1 [ 0.585073] Console: switching to colour frame buffer device 100x30 [ 0.590689] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 0.590757] ALSA device list: [ 0.590764] No soundcards found. [ 0.594042] EXT3-fs (mmcblk0p1): mounted filesystem with ordered data mode [ 0.594098] VFS: Mounted root (ext3 filesystem) readonly on device 179:1. [ 0.594204] kjournald starting. Commit interval 5 seconds [ 0.595303] devtmpfs: mounted [ 0.595518] Freeing init memory: 156K [ 0.644814] hub 2-1:1.0: USB hub found [ 0.645214] hub 2-1:1.0: 4 ports detected [ 0.820255] systemd[1]: Failed to insert module 'ipv6' [ 0.922528] usb 2-1.1: new full-speed USB device number 3 using sw-ehci [ 1.038371] input: RAPOO RAPOO 2.4G Wireless Device as /devices/platform/sw-ehci.1/usb2/2-1/2-1.1/2-1.1:1.0/input/input1 [ 1.038680] generic-usb 0003:24AE:2000.0001: input: USB HID v1.01 Keyboard [RAPOO RAPOO 2.4G Wireless Device] on usb-sw-ehci-1.1/input0 [ 1.044550] input: RAPOO RAPOO 2.4G Wireless Device as /devices/platform/sw-ehci.1/usb2/2-1/2-1.1/2-1.1:1.1/input/input2 [ 1.045886] generic-usb 0003:24AE:2000.0002: input: USB HID v1.01 Mouse [RAPOO RAPOO 2.4G Wireless Device] on usb-sw-ehci-1.1/input1 [ 1.122601] usb 2-1.2: new high-speed USB device number 4 using sw-ehci [ 1.151204] systemd[1]: [/etc/systemd/system/systemd-fsck-root.service.d/silent.conf:1] Assignment outside of section. Ignoring. [ 1.151291] systemd[1]: [/etc/systemd/system/systemd-fsck-root.service.d/silent.conf:2] Assignment outside of section. Ignoring. [ 1.165855] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. [ 1.313486] usb 2-1.4: new high-speed USB device number 5 using sw-ehci [ 1.398791] UMP: UMP device driver loaded [ 1.438435] hub 2-1.4:1.0: USB hub found [ 1.438907] hub 2-1.4:1.0: 4 ports detected [ 1.440230] Mali: permit MALI_IOC_MEM_MAP_EXT ioctl for framebuffer (paddr=0x44000000, size=16777216) [ 1.440316] mali: use config clk_div 2 [ 1.440325] mali: clk_div 2 [ 1.440350] Mali: mali clock set completed, clock is 180000000 Hz [ 1.450542] mali: use config clk_div 2 [ 1.450559] mali: clk_div 2 [ 1.450586] Mali: mali clock set completed, clock is 180000000 Hz [ 1.451987] Mali: Mali device driver loaded [ 1.511116] [sw_udc]: [sw_usb_udc]: binding gadget driver 'RED Brick' [ 1.511141] [sw_udc]: alloc request: ep(0x807cddb8, ep0, 64), req(0x9ec16f40) [ 1.511159] WRN:L2728(drivers/usb/sunxi_usb/udc/sw_udc.c):ERR: usb device is not active [ 1.511322] ep_matches, wrn: endpoint already claimed, ep(0x807cde04, 0x9fbccb00, ep1-bulk) [ 1.511335] [sw_udc]: alloc request: ep(0x807cde04, ep1-bulk, 512), req(0x9fb854c0) [ 1.511348] [sw_udc]: alloc request: ep(0x807cde04, ep1-bulk, 512), req(0x9fb85540) [ 1.511361] [sw_udc]: alloc request: ep(0x807cde04, ep1-bulk, 512), req(0x9fb85580) [ 1.511372] [sw_udc]: alloc request: ep(0x807cde04, ep1-bulk, 512), req(0x9fb855c0) [ 1.511384] [sw_udc]: alloc request: ep(0x807cde04, ep1-bulk, 512), req(0x9fb85600) [ 1.511396] [sw_udc]: alloc request: ep(0x807cde04, ep1-bulk, 512), req(0x9fb85640) [ 1.511408] [sw_udc]: alloc request: ep(0x807cde04, ep1-bulk, 512), req(0x9fb85680) [ 1.511420] [sw_udc]: alloc request: ep(0x807cde04, ep1-bulk, 512), req(0x9fb856c0) [ 1.511432] [sw_udc]: alloc request: ep(0x807cde04, ep1-bulk, 512), req(0x9fb85700) [ 1.511444] [sw_udc]: alloc request: ep(0x807cde04, ep1-bulk, 512), req(0x9fb85740) [ 1.511456] [sw_udc]: alloc request: ep(0x807cde04, ep1-bulk, 512), req(0x9fb85780) [ 1.511467] [sw_udc]: alloc request: ep(0x807cde50, ep2-bulk, 512), req(0x9fb857c0) [ 1.511479] [sw_udc]: alloc request: ep(0x807cde50, ep2-bulk, 512), req(0x9fb85800) [ 1.511491] [sw_udc]: alloc request: ep(0x807cde50, ep2-bulk, 512), req(0x9fb85840) [ 1.511502] [sw_udc]: alloc request: ep(0x807cde50, ep2-bulk, 512), req(0x9fb85880) [ 1.511514] [sw_udc]: alloc request: ep(0x807cde50, ep2-bulk, 512), req(0x9fb858c0) [ 1.511526] [sw_udc]: alloc request: ep(0x807cde50, ep2-bulk, 512), req(0x9fb85900) [ 1.511538] [sw_udc]: alloc request: ep(0x807cde50, ep2-bulk, 512), req(0x9fb85940) [ 1.511550] [sw_udc]: alloc request: ep(0x807cde50, ep2-bulk, 512), req(0x9fb85980) [ 1.511561] [sw_udc]: alloc request: ep(0x807cde50, ep2-bulk, 512), req(0x9fb859c0) [ 1.511573] [sw_udc]: alloc request: ep(0x807cde50, ep2-bulk, 512), req(0x9fb85a00) [ 1.511587] PPPHHH: dual speed brick: IN/ep1-bulk, OUT/ep2-bulk [ 1.511598] ep_matches, wrn: endpoint already claimed, ep(0x807cde04, 0x9fbccb00, ep1-bulk) [ 1.511609] ep_matches, wrn: endpoint already claimed, ep(0x807cde50, 0x9fbccb00, ep2-bulk) [ 1.511621] ep_matches, wrn: endpoint already claimed, ep(0x807cde04, 0x9fbccb00, ep1-bulk) [ 1.511631] ep_matches, wrn: endpoint already claimed, ep(0x807cde50, 0x9fbccb00, ep2-bulk) [ 1.511641] ep_matches, wrn: endpoint already claimed, ep(0x807cde9c, 0x9ec16e00, ep3-bulk) [ 1.511652] ep_matches, wrn: endpoint already claimed, ep(0x807cde04, 0x9fbccb00, ep1-bulk) [ 1.511662] ep_matches, wrn: endpoint already claimed, ep(0x807cde50, 0x9fbccb00, ep2-bulk) [ 1.511673] ep_matches, wrn: endpoint already claimed, ep(0x807cde9c, 0x9ec16e00, ep3-bulk) [ 1.511683] ep_matches, wrn: endpoint already claimed, ep(0x807cdee8, 0x9ec16e00, ep4-bulk) [ 1.511693] [sw_udc]: alloc request: ep(0x807cdf34, ep5-int, 512), req(0x9fb85a40) [ 1.511719] RED Brick gadget: RED Brick ready [ 1.511728] WRN:L2761(drivers/usb/sunxi_usb/udc/sw_udc.c):ERR: usb device is not active [ 1.785923] systemd-udevd[88]: starting version 215 [ 2.357324] sw_usb_enable_hcd: usbc_num = 1 [ 2.630878] usbcore: registered new interface driver rtl8188eu [ 3.311357] EXT3-fs (mmcblk0p1): using internal journal [ 3.400192] systemd-journald[64]: Received request to flush runtime journal from PID 1 [ 5.272123] insmod_device_driver [ 5.272139] [sw_udc]: sw_usb_device_enable start [ 5.272148] [sw_udc]: usb_vbase = 0xf1c13000 [ 5.272157] [sw_udc]: sram_vbase = 0xf1c00000 [ 5.272183] [sw_udc]: open_usb_clock [ 5.381854] [sw_udc]: CONFIG_USB_GADGET_DUALSPEED [ 5.381876] [sw_udc]: usbd_start_work [ 5.381885] [sw_udc]: sw_usb_device_enable end [ 5.437339] [sw_udc]: IRQ: suspend [ 5.437357] [sw_udc]: ERR: usb speed is unkown [ 5.543283] [sw_udc]: IRQ: reset [ 5.543305] [sw_udc]: irq: reset happen, throw away all urb [ 5.700483] [sw_udc]: [ 5.700505] +++++++++++++++++++++++++++++++++++++ [ 5.700513] [sw_udc]: usb enter high speed. [ 5.700520] [sw_udc]: [ 5.700525] +++++++++++++++++++++++++++++++++++++ [ 5.705202] [sw_udc]: IRQ: reset [ 5.705228] [sw_udc]: irq: reset happen, throw away all urb [ 5.858461] [sw_udc]: Set address 1 [ 5.904412] RED Brick gadget: high-speed config #1: foobar [ 5.904435] [sw_udc]: ep enable: ep1(0x807cde04, ep1-bulk, 128, 512) [ 5.904457] [sw_udc]: ep enable: ep2(0x807cde50, ep2-bulk, 0, 512) [ 5.904481] [sw_udc]: ep enable: ep5(0x807cdf34, ep5-int, 128, 10) [ 5.904495] [sw_udc]: ep enable: ep3(0x807cde9c, ep3-bulk, 128, 512) [ 5.904508] [sw_udc]: ep enable: ep4(0x807cdee8, ep4-bulk, 0, 512) [ 5.904738] nuke: ep num is 0 [ 5.912600] WRN:L1355(drivers/usb/sunxi_usb/udc/sw_udc.c):handle_ep0: ep0 setup end [ 5.912621] nuke: ep num is 0 [ 7.577371] incomplete xfer (0x20) [ 7.577951] incomplete xfer (0x20) [ 8.028507] [sw_udc]: alloc request: ep(0x807cdee8, ep4-bulk, 512), req(0x9ed86780) [ 8.028534] [sw_udc]: alloc request: ep(0x807cdee8, ep4-bulk, 512), req(0x9ec10400) [ 8.028547] [sw_udc]: alloc request: ep(0x807cdee8, ep4-bulk, 512), req(0x9ec10d40) [ 8.028560] [sw_udc]: alloc request: ep(0x807cdee8, ep4-bulk, 512), req(0x9ec10440) [ 8.028572] [sw_udc]: alloc request: ep(0x807cdee8, ep4-bulk, 512), req(0x9ee88a00) [ 8.028585] [sw_udc]: alloc request: ep(0x807cdee8, ep4-bulk, 512), req(0x9ee88340) [ 8.028597] [sw_udc]: alloc request: ep(0x807cdee8, ep4-bulk, 512), req(0x9ee88bc0) [ 8.028610] [sw_udc]: alloc request: ep(0x807cdee8, ep4-bulk, 512), req(0x9ee881c0) [ 8.028621] [sw_udc]: alloc request: ep(0x807cdee8, ep4-bulk, 512), req(0x9ee884c0) [ 8.028633] [sw_udc]: alloc request: ep(0x807cdee8, ep4-bulk, 512), req(0x9ee888c0) [ 8.028644] [sw_udc]: alloc request: ep(0x807cdee8, ep4-bulk, 512), req(0x9ee886c0) [ 8.028655] [sw_udc]: alloc request: ep(0x807cdee8, ep4-bulk, 512), req(0x9ee88840) [ 8.028672] [sw_udc]: alloc request: ep(0x807cdee8, ep4-bulk, 512), req(0x9ee887c0) [ 8.028684] [sw_udc]: alloc request: ep(0x807cdee8, ep4-bulk, 512), req(0x9ef16c80) [ 8.028697] [sw_udc]: alloc request: ep(0x807cdee8, ep4-bulk, 512), req(0x9ec1ae40) [ 8.028708] [sw_udc]: alloc request: ep(0x807cdee8, ep4-bulk, 512), req(0x9ec1adc0) [ 8.028721] [sw_udc]: alloc request: ep(0x807cde9c, ep3-bulk, 512), req(0x9ee7f680) [ 8.028733] [sw_udc]: alloc request: ep(0x807cde9c, ep3-bulk, 512), req(0x9ee7f300) [ 8.028744] [sw_udc]: alloc request: ep(0x807cde9c, ep3-bulk, 512), req(0x9ee7f500) [ 8.028756] [sw_udc]: alloc request: ep(0x807cde9c, ep3-bulk, 512), req(0x9ee7f380) [ 8.028769] [sw_udc]: alloc request: ep(0x807cde9c, ep3-bulk, 512), req(0x9ee7f4c0) [ 8.028781] [sw_udc]: alloc request: ep(0x807cde9c, ep3-bulk, 512), req(0x9ee7f440) [ 8.028792] [sw_udc]: alloc request: ep(0x807cde9c, ep3-bulk, 512), req(0x9ee7f400) [ 8.028803] [sw_udc]: alloc request: ep(0x807cde9c, ep3-bulk, 512), req(0x9ee7f780) [ 8.028815] [sw_udc]: alloc request: ep(0x807cde9c, ep3-bulk, 512), req(0x9ee7f900) [ 8.028826] [sw_udc]: alloc request: ep(0x807cde9c, ep3-bulk, 512), req(0x9ee7f480) [ 8.028837] [sw_udc]: alloc request: ep(0x807cde9c, ep3-bulk, 512), req(0x9ee7f540) [ 8.028849] [sw_udc]: alloc request: ep(0x807cde9c, ep3-bulk, 512), req(0x9ee7f940) [ 8.028862] [sw_udc]: alloc request: ep(0x807cde9c, ep3-bulk, 512), req(0x9ee7f2c0) [ 8.028874] [sw_udc]: alloc request: ep(0x807cde9c, ep3-bulk, 512), req(0x9ee7f640) [ 8.028885] [sw_udc]: alloc request: ep(0x807cde9c, ep3-bulk, 512), req(0x9ee7f340) [ 8.028897] [sw_udc]: alloc request: ep(0x807cde9c, ep3-bulk, 512), req(0x9ee7f3c0) [ 42.968744] UpdateHalRAMask8188EUsb => mac_id:0, networkType:0x0b, mask:0x000fffff [ 42.968754] ==> rssi_level:0, rate_bitmap:0x000ff015 [ 46.547748] UpdateHalRAMask8188EUsb => mac_id:0, networkType:0x0b, mask:0x000fffff [ 46.547757] ==> rssi_level:2, rate_bitmap:0x000ff000 [ 661.045353] WRN:L1355(drivers/usb/sunxi_usb/udc/sw_udc.c):handle_ep0: ep0 setup end [ 661.045372] nuke: ep num is 0 tf@red-brick:~$